![]() ![]() The position of the sensors is shown in diagram below. If the temperature rises higher than 85° C the system should be shut down. A warning should be given, if temperature rises higher than 80° C. Voltage options Phoenix - AwardBIOS CMOS Setup Utility Voltage Options Default CPU Voltage Default Item Help Memory Voltage Default Menu Level :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5: Previous Values F7: Optimized Defaults CPU Voltage This option is used to change the CPU voltage. The maximum operating temperature is 80☌. Temperature sensor 1 of the system board of the CX1010. If the temperature rises higher than 95° C the system should be shut down. A warning should be given, if temperature rises higher than 85° C. The maximum operating temperature is 85☌. ↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Helpį5: Previous Values F6: Fail-Safe Defaults F7: Optimized DefaultsĮmergency temperature system is shutting down. Since the CX50x0 devices support graphic outputs only via DVI-I, this setting is always set to DVI.This menu is used for displaying the settings for CPU and motherboard temperatures, power supply, and fan speed. This setting indicates the output source for the boot process. The current graphics configuration is shown here. Make sure the system stability is not affected and proceed step-by-step (1 MB, 4 MB, 8 MB) Current Configuration The individual options can be used to try and enhance the performance. Reset Configuration Data Enabled Resources Controlled By Manual 8 IRQ Resources Press Enter PCI/VGA Palette Snoop Disabled :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Help. This option can be used to adapt the frame buffer. (128 MB, 256 MB) On-Chip Frame Buffer Size Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltage Control. This option can be used to set the size of the video memory. Standard CMOS Features Advanced BIOS Features Advanced Chipset Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status. This information is stored in CMOS RAM so that it can retain the setup information even when the power is turned off. Under Win.x and DOS this option should be enabled, otherwise it should be disabled. : Chapter 3 Phoenix Award Bios Setup Utility Chapter 3 Chapter 3 Phoenix Award BIOS Setup Utility Phoenix-Award BIOS ROM has a built-in setup program that allows users to modify the basic system configuration. Under DOS the speed benefits is around 40%. If this option is enabled, the option Video BIOS Shadow should also be activated. Try to google your motherboard model and find out the specs. Please note that caching involves risks, if the cache contains the code and a program wants to write into the BIOS area. If this option is enabled, the cache memory can take the VIDEO BIOS of the graphics card at the address C0000h to C7FFFh into account. Under Windows 95/98 this option is less relevant. If the function is active the cache memory makes use of the available BIOS-ROM, thereby enhancing the performance, although this applies mainly to DOS and Win3.x. During this process critical parameter information relating to memory type, size, speed, voltage interface and module banks are stored in the EEPROM. If that doesnt work, contact your administrator, or the person who sold you. By default the options are configured via 'By SPD', by reading the content of the SPD (Serial Presence Detect ) unit. System Restore from boot menu/ setup utility Best answer: Well, as long as the password was not placed by an administrator of the machine (who changed it from default), the default password is 'phoenix'. This submenu can be used for setting the optimum timing for options, depending on the memory modules used. ↑ ↓ → ← :Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:Helpį5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults DRAM Timing Selectable ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |